詳細內容：產品基本信息： 型號：SYNTHESO D 1000 英文名稱:KLUBER SYNTHESO D 1000 粘度等級：ISO VG 1000 品牌/產地：克魯勃，德國 包裝規格及價格：20KG/3880 180KG/31800 類型：合成高溫齒輪油 寶貝描述： SYNTHESO D 32/68/100/220/460/680/1000/1500合成高溫潤滑油 說明：SYNTHESO D是合成油，聚乙二醇高溫油為基礎。他們非常耐老化和氧化，并有非常良好的粘溫關系。 應用：SYNTHESO D是用于潤滑的摩擦點的主題高溫。他們是如此作為液壓油用于高溫應用，并作為熱載體的流體。由于基礎油的高壓吸收能力和良好的抗磨損保護，SYNTHESO D特別是適用于水力或傳熱潤滑的應用場合。 包裝規格：20千克桶180公斤桶裝 德語： SYNTHESO D 1000 oils Synthetic high-temperature lubricating oilsDescription: SYNTHESO D 1000 oils are synthetic high-temperature oils on a polyglycol basis. They are very resistant to ageing and oxidation and have a very good viscosity-temperature relation. Application: SYNTHESO D 1000 oils are used for the lubrication of friction points subject to high temperatures. They are also used as pressure fluids in hightemperature applications, and as heat carrier fluids. Owing to the base oil’s high pressure absorption capacity and good wear protection, SYNTHESO D oils are particularly suitable for hydraulic or heat transfer applications where lubricity has to be ensured at high temperatures. Application notes: SYNTHESO D oils are suitable for immersion and circulation lubrication systems. If they are used as heat carrier fluids it is important not to exceed a specific load of approx. 1.5 W/cm2 in case of free convection and approx. 2 W/cm2 in case of forced convection. The maximum surface temperature of the heat exchanger (film load limit) should not exceed approx. 220 °C. The maximum permanent service temperature of SYNTHESO D oils is approx. 180 °C. Service temperature range*: SYNTHESO D 32: approx. – 40 to 180 °C SYNTHESO D 68 und D 100: approx. – 35 to 180 °C SYNTHESO D 220 bis D 680: approx. – 25 to 180 °C SYNTHESO D 1000: approx. – 20 to 180 °C SYNTHESO D 1500: approx. 0 to 180 °C SYNTHESO D oils are not miscible with mineral oils and synthetic hydrocarbons. We recommend cleaning the lubrication points prior to conversion, and rinsing gears or closed lubrication systems with the SYNTHESO D oil that will be used for lubrication. SYNTHESO D oils are neutral towards ferrous materials and almost all nonferrous metals. There may be increased wear when the contact surfaces of design elements made of aluminium or aluminium alloys are exposed to dynamic loads (sliding speed and high loads). If necessary, wear tests should be carried out. Depending on the temperature and exposure time, synthetic lubricants on a polyglycol base may have an impact on the functional capacity of rubber-elastic sealing materials. Seals made of NBR materials (acrylonitrile-butadiene- rubber) can be used at permanent temperatures up to 100 °C. At higher temperatures we recommend using FPM (fluoropolymers)or VMQ (silicone rubber) seals. It has to be taken into account that different elastomer qualities produced by one manufacturer or different manufacturers may show a different behaviour. Paints may be attacked by synthetic lubricants. When applying SYNTHESO D oils we recommend the use of twocomponent paints (reactive paints). Oil gauge glasses should preferably be made of natural glass or polyamide materials. We recommend testing the suitability of design materials in contact with the selected lubricants, especially for series application. Minimum shelf life: The minimum shelf life is approx. 36 months if the product is stored in the original closed container in a dry place. Pack sizes: 20 kg bucket 180 kg drumSYNTHESO D 1000 Oils • Good resistance to ageing and oxidation • High service temperature limit • Excellent viscositytemperature relation