詳細內容：產品基本信息： 型號：synth GH 6-100 英文名稱:KLUBERsynth GH 6-100 粘度等級：ISO VG 100 品牌/產地：克魯勃，德國 包裝規格及價格：20L/3600 200L/33800 類型：合成高溫齒輪油 寶貝描述： Klubersynth GH 6-(32,80,150,220,320,460,680,1000)合成高溫齒輪油。 說明：Klübersynth GH6高溫聚乙二醇齒輪油基礎。他們有增加的劃傷提供良好的負載能力和保護，防止磨損。嚴格的FZG試驗（A/16.6/140），這些油有劃傷加載階段> 12并在重量與工作有關的損失≤0.2毫克/千瓦時。 Klübersynth GH6特別是抗老化和氧化，他們有一個良好的粘溫關系并顯示出優異的高溫行為。 應用領域：Klübersynth GH6特別是制定了蝸桿與齒輪潤滑鋼/銅配對。在這應用程序有兩個有趣的方面：特殊的聚乙二醇基地油降低了摩擦系數，和非常有效的添加劑最大限度地減少磨損。Klübersynth GH6也適用潤滑所有類型的斜面與正齒輪，滑動與滾動軸承以及齒聯軸器，特別是當接觸到溫度升高。 特性： 合成齒輪高溫油 優異的粘溫的關系 寬工作溫度的范圍 減少摩擦 高劃傷負載能力 良好的抗磨損性能。 包裝規格：20升罐200升鼓 德文： Klübersynth GH 6 Oils Synthetic gear and high-temperature oils Description: Klübersynth GH 6 oils are high-temperature gear oils on a polyglycol basis. They have an increased scuffing load capacity and provide good protection against wear. In the stringent FZG test (A/16.6/140) these oils had a scuffing load stage > 12 and a work-related loss in weight ≤ 0.2 mg/kWh. Klübersynth GH 6 oils are particularly resistant to ageing and oxidation, they have a good viscosity-temperature relationship and show an excellent hightemperature behaviour. Fields of application: Klübersynth GH 6 oils were especially developed for the lubrication of worm gears with steel/bronze pairings. In this application there are two interesting aspects: the special polyglycol base oils reduce the friction coefficient, and the very efficient additives minimize wear. Klübersynth GH 6 oils are also suitable to lubricate all types of bevel and spur gears, plain and rolling bearings as well as toothed couplings, especially when exposed to increased temperatures. Application notes: Klübersynth GH 6 oils can be applied by immersion, immersion circulation and injection. Observe the manufacturer’s instructions about the maximum viscosity that can be pumped. Klübersynth GH 6 oils are not miscible with mineral oils and synthetic hydrocarbons. We recommend cleaning the lubrication points prior to conversion, and rinsing gears or closed lubricating systems with the Klübersynth GH 6 oil that will be used for lubrication. Klübersynth GH 6 oils are neutral towards ferrous materials and almost all nonferrous metals. There may be increased wear when the contact surfaces of design elements made of aluminium or aluminium alloys are exposed to dynamic loads (sliding speed and high loads). If necessary, wear tests should be carried out. Depending on temperature and exposure time, synthetic lubricants on a polyglycol base may have an impact on the functional capacity of rubber-elastic sealing materials. Seals made of NBR materials (acrylonitrile-butadiene-rubber) can be used at permanent temperatures up to 100 °C. For higher temperatures we recommend to use seals made of FKM materials (fluorinated rubber), i. e. elastomers which are resistant to Klübersynth GH 6 oils. It has to be taken into account that different elastomer qualities produced by one manufacturer or different manufacturers may show a different behaviour. For approximate values about a change in volume and hardness of NBR and FKM materials in contact with Klübersynth GH 6 oils refer to the table “compatibility with elastomers”. Paints may be attacked by synthetic lubricants. When applying Klübersynth GH 6 oils we recommend the use of two-component paints (reactive paints) for interior coating. Oil gauge glasses should preferably be made of natural glass or polyamide materials. Other transparent plastics, e. g. Plexiglas, have a tendency to crack under stress. We recommend testing the suitability of design materials and paints in contact with the selected lubricants, especially for series application. Viscosity selection for rolling bearings and gears: Selection of the correct oil viscosity for rolling bearings To select the correct oil viscosity observe the bearing manufacturer’s instructions or refer to GfT worksheet 3 (GfT = Society of Tribology). For determining the existing viscosity, refer to the enclosed viscositytemperature diagram indicating the differing viscosity-temperature behaviour of Klübersynth GH 6 oils as compared to mineral oils. Selection of the correct oil viscosity for gears The manufacturer’s instructions take priority in all cases. The correct viscosity can also be selected in accordance with the enclosed worksheet “Klübersynth GH 6 oils – Selection of oil viscosity for gears”. Service temperature range: Gear and chain lubrication by immersion: Klübersynth GH 6-32: from approx. – 45 °C to 160 °C Klübersynth GH 6-80 … 150: from approx. – 35 °C to 160 °C Klübersynth GH 6-220 and -320: from approx. – 30 °C to 160 °C Klübersynth GH 6-460 … 1000: from approx. – 25 °C to 160 °C Klübersynth GH 6-Oils Synthetic gear and hightemperature oil Excellent viscosity-temperature relation Wide service temperature range Reduces friction High scuffing load capacity Good antiwear properties