詳細內容：產品基本信息： 型號：MICROLUBE GB 0 英文名稱:KluberMICROLUBE GB 0 粘度等級：NLGI 0 品牌/產地：克魯勃，德國 包裝規格及價格：1KG/380 25KG/8800 180KG/62000 類型：通用高性能潤滑脂 寶貝描述： MICROLUBE GB 0通用高性能潤滑劑 說明：MICROLUBE GB0是一個特殊的礦物油基潤滑劑。它有一個高壓吸收能力，提供良好的保護抗磨損和腐蝕，顯示了良好的潤濕行為和耐水性。 應用：MICROLUBE GB0開發的摩擦點主題是高負荷和混合摩擦條件。它是一種通用的潤滑脂適合偏心壓力機的潤滑（例如使穆勒 - 萬家頓）重型軌道和錐齒輪鋼/鋼組件（如齒輪馬達沒有油密）導軌，導軌和泥潭滾動軸承的潤滑。在FZG特殊的測試A/2.76/50該產品實現了擦傷載荷舞臺> 12和具體的變化重量<0.2毫克/千瓦時。 包裝規格：1公斤25千克鼓180公斤容器 德語： MICROLUBE GB 0 Universal high-performance lubricant Description: MICROLUBE GB 0 is a special mineral oil based lubricant. It has a high pressure absorption capacity, provides excellent protection against wear and corrosion, and shows a good wetting behaviour and water resistance. Application: MICROLUBE GB 0 was especially developed for friction points subject to high loads and mixed friction conditions. It is a universal grease suitable for the lubrication of eccentric presses (e.g. make Müller-Weingarten), heavy-duty spur and bevel gears with steel/steel components (e.g. gear motors that are not oiltight), slideways, guides and sump lubricated rolling bearings. In the special FZG test A/2.76/50 this product achieves a scuffing load stage > 12 and a specific change in weight of < 0.2 mg/kWh. Application notes: MICROLUBE GB 0 is applied by brush, spatula, grease gun or centralized lubrication system. Immersion lubrication of gears is possible up to a peripheral speed of approx. 3 m/s or via forced-feed lubrication. Service temperature range Approx. – 20 to 90 °C in centralized or forced-feed systems, and approx. 0 to 100 °C in case of immersion lubrication. The lubricant film is functional to approx. – 25 °C. The thermal load-carrying capacity of the lubricant film depends on relubrication and is up to approx. 150 °C. The indicated temperatures are approximate values depending on the lubricant’s composition, the intended use and the application method. Minimum shelf life: The minimum shelf life is approx. 36 months if the product is stored in the original closed container in a dry place. Pack sizes: 1 kg can 25 kg drum 180 kg containerMICROLUBE GB 0 Universal high-performance lubricant High pressure absorption capacity Good wear protection Good anticorrosion behaviour Pumpable through centralized systems Special FZG test A/2.76/50, scuffing load stage > 12