詳細內容：產品基本信息： 型號：MICROLUBE GB 00 英文名稱:KluberMICROLUBE GB 00 粘度等級：NLGI 00 品牌/產地：克魯勃，德國 包裝規格及價格：1KG/380 25KG/8800 類型：流體齒輪潤滑脂 寶貝描述： MICROLUBE GB 00流體齒輪潤滑脂 說明：MICROLUBEGB00是一個特殊的礦物油基潤滑脂不受固體潤滑劑。它有一個高壓吸收能力，提供出色的抗磨損保護和腐蝕，顯示出良好的潤濕行為和耐水性回流的行為。 應用：MICROLUBE GB00適合公羊的lubraction在機械壓力機，重型軌道油密與錐形齒輪（如齒輪電機，小齒輪），鋼/蝸輪以及齒鋼構件聯軸器。因此，為適合的滑道，引導和潤滑大型連鎖驅動器。在FZG特殊的測試A/2.76/50該產品實現了擦傷載荷舞臺> 12和具體的變化重量<0.2毫克/千瓦時。 包裝規格：1公斤可以25千克鼓 德語： MICROLUBE GB 00 Fluid gear grease Description: MICROLUBE GB 00 is a special mineral oil based grease free from solid lubricants. It has a high pressure absorption capacity, provides excellent protection against wear and corrosion, shows good wetting behaviour, water resistance and backflow behaviour. Application: MICROLUBE GB 0 is suitable for the lubraction of rams in mechanical presses, heavy-duty oiltight spur and bevel gears (e.g. gear motors, small gears), worm gears with steel/ steel components as well as toothed couplings. It is also suitable for the lubrication of slideways, guides and large chain drives. In the special FZG test A/2.76/50 this product achieves a scuffing load stage > 12 and a specific change in weight of < 0.2 mg/kWh. Application notes: MICROLUBE GB 00 is suitable for the immersion lubrication of gears up to a peripheral speed of approx. 4 m/s. Forced-feed lubrication is possible at increased speeds. MICROLUBE GB 00 can also be applied through centralized systems. Service temperature range: Approx. 0 to 100 °C in case of immersion lubrication, and approx. – 20 to 90 °C when applied through a centralized or forced-feed system.The thermal load-carrying capacity of the lubricant film depends on relubrication and is up to approx. 150 °C. Service temperatures are guide values which depend on the lubricant’s composition, the intended use and the application method. Lubricants change their consistency, viscosity or apparent dynamic viscosity depending int he mechano-dynamical loads, time, pressure and temperature. These changes in the product characteristics may affect the function of a component. Minimum shelf life: The minimum shelf life is approx. 36 months if the product is stored in the original closed container in a dry place. Pack sizes: 1 kg can 25 kg drumMICROLUBE GB 00 • Fluid gear grease • High pressure absorption capacity • Good wear protection • Good anticorrosion behaviour • No chanelling in case of immersion lubrication • Pumpable through centralized systems • Special FZG test A/2.76/50, scuffing load stage > 12